Like us on Facebook Follow on Twitter Our YouTube Flickr

Accessories

Base Plate – Model No. BP1

Base Plate Provides footing for frame assembly on flat surfaces.
lbp1 Base Plate


Base Plate – Model No. BP31

Swivel base plate illustrated on sloping roof. Provides footing for frame assembly on uneven and angled surfaces. Has four nail holes in base.
lbp3 Base Plate


Casters

Casters are used to create mobile scaffolding. They must her secured to frame legs. Casters have rubber tires that swivel and are equipped with locks.
Casters


Leveling Jack – Model No. LLJ1

Leveling jack with bast plate attached, to level scaffolding on uneven surfaces.
Leveling Jack


Leveling Jack – Model No. LLJ2

Leveling jack for use with bast plates or casters. Weighs 5 lbs.
Leveling Jack


Outrigger

A light duty outrigger for use with casters to widen the bast and stabilize a mobile scaffold tower.
Outrigger


Pins – Model LCP

Coupling Pin joins the member for stacking light duty frames above each other. Must be bolted or pinned in place by a locking pin.
Pins  - Model LCP


COUPLING PINS – Model No. CP1

For use with Vanguard Standard Duty Frames. Coupling pin is 9″ long x 1 3/8″ O.D. Fitted with 1″ mid-point collar.
COUPLING PINS - Model No. CP1


Cross Braces

All cross braces are fabricated from 1′ O.D. galvanized steel tubing with .073″ wall thickness. Cross breaches are used to breach the frames with drop locks at carious spacings.
Cross Braces


Curved Base Plate

Curved base plate provides a starting point for frame on putlog on horizontal frame members.
Curved Base Plate


Diagonal Braces

Diagonal Braces offer corner-to-corner diagonal stability to scaffold towers that are cross braced or straddle braced.
Diagonal Braces


End Arms

End Arms End Arms


Guard Rail Posts – Model No. CGRPF

Corner guard rail pose for former or line post use. One threaded top stud; two threaded mid-rail studs.
Guard Rail Posts


HD Hoist Arm

Heavy Duty Hoist Arm features guard rail post fittings and 100 lbs. capacity.
Swivel head rotates 360 degrees
Tubular steel frame
Reinforced upright
Closed steel loop for wheel hook
HD Hoist Arm


Hoist Arm

Tubular Steel Frame
Reinforced upright
Closed steel loop for wheel hook.
Capacity – 75 lbs
Hoist Arm


Hoist Arm Wheel

Permanently lubricated bronze bearing. Hook is equipped with a safety latch. Entire assembly is zinc plated for rust protection.
Hoist Arm Wheel


HOISTING ROPE WITH HOOK

HOISTING ROPE WITH HOOK


Inside Hand Rail – Model No. IHR6

Inside hand rail for use on 6′-4″ stairways.
Inside Hand Rail


Intermediate Guard Rail Panels

Provides guard rail protection on the cross brace side on the work platform.
Casters


Outside Hand Rail – Model No. OHR6

Outside Hand Rail for use on 5′ stairways.
Outside Hand Rail


Put Logs

Put Logs
Put Logs
Put Logs


Side Arms – Model No. SA21

Side arm bracket to extend work area outward up to 21.5″
Side Arms - Model No. SA21
Side Arms - Model No. SA21


Side Arms – Model No. SA24

Side arm bracket to extend work area outward up to 24″


STAIRWAYS – Model No. SW5

22′ wide stairways for use with 5′ high frames.

STAIRWAYS – Model No. SW6

22″ wide stairways for use with 6′-4″ high frames.
STAIRWAYS - Model No. SW5-6


Straddle Braces

Two diagonal members of the straddle braces are fabricated from 1 1/4 O.D. steel tubing with .086″ wall thickness. The horizontal straddle brace tubing is made of 1 5/8′ O.D. steel with


Swing Gate End Panel

Swing Gate End Panel is designed to provide safe access to the top platform level.
Swing Gate End Panel


Swivel Clamp

Swivel Clamp


Tie In Components – Model No. WTC3

Connects with scaffold frame with swivel coupler.
Tie In Components - Model No. WTC3


Tie In Components – Model No. WTC5

Connects with scaffold frame with swivel coupler.
Tie In Components - Model No. WTC3


Toeboards

Toe boards are made from 1 1/4″ x 4″ galvanized steel channel. They are used to enclose the work platform area of a single tower.
Toeboards


Toggle Pins

Toggle pin is a solid pin with swivel bar.
Toggle Pins